焊接專機的結構組成由焊接電源、焊接機頭、焊件移動或變?yōu)檠b置、輔助裝置（送絲裝置、焊機回收輸送裝置、拖鏈、支架、電氣控制等）。通過結構可以了解到山東焊接專機的注意事項，如下：

The structure of special welding machine consists of welding power source, welding head, moving or transforming device of weldment, auxiliary device (wire feeder, welding machine reclaiming and conveying device, drag chain, support, electrical control, etc.). Through the structure, we can know the precautions of Shandong welding special aircraft, as follows:

1.為了保證焊接精度，焊接平臺需要定期清理，避免粘上油污等。

1. In order to ensure the welding accuracy, the welding platform needs to be cleaned regularly to avoid oil stains.

2.設備要保證平穩，調整好位置避免精度受到影響。

2. The equipment shall be stable, and the position shall be adjusted to avoid affecting the accuracy.

3.在設備運行的同時要注意觀察焊接情況，防止發生焊接意外。操作工不可以閑談，玩手機等干于工作無關的事。

3. While the equipment is running, pay attention to the welding conditions to prevent welding accidents. Operators are not allowed to chat, play with mobile phones and do things unrelated to their work.

4.操作工要穿戴防護用品，焊接溫度以及電氣故障帶電情況會對人身造成一定威脅。

4. Operators shall wear protective equipment. Welding temperature and electrification of electrical faults will pose a certain threat to human life.

5.送絲裝置或者送料裝置出現故障要及時停止，斷電檢查其工作情況。

5. In case of failure of wire feeder or material feeder, stop it in time and check its working condition by powering off the power.

6.自動焊接專機周圍要避免雜物，防止電源或電線受損發生意外。

6. Sundries shall be avoided around the automatic welding machine to prevent accidents due to damage of power supply or wires.

7.在通電情況下不可以自行打開數控控制箱及各種線路，防止觸電。

7. It is not allowed to open the numerical control control box and various lines by yourself when the power is on to prevent electric shock.

8.離開崗位前和下班前要關閉電源和氣源，防止他人隨意操作。

8. Turn off the power and gas source before leaving the post and before going off duty to prevent others from operating at will.

此外提醒您，遇到焊接問題，及時上報領導聯系廠家，做出方案才可調整。更多相關內容就來我們網站http://m.agbet3.com進行咨詢了解！

In addition, we remind you that in case of welding problems, timely report to the leader to contact the manufacturer and make a plan before adjustment. More relevant content will come to our website http://m.agbet3.com Ask about it!